Ministère de l'Enseignement Supérieur et de la Recherche Scientifique

Centre de Recherche
en Technologies Industrielles CRTI

crti

Curriculum vitae


ALIMI_Latifa

Mme. ALIMI Latifa
Équipe de recherche 32 : Composites : Developpement et Fiabilité (DMUE)
Grade : Maitre de Recherche Classe « B »
E-Mail : l.alimi@crti.dz


Diplomes :

  • 2016: Doctorat en Génie mécanique
  • 2008: Magistère en Mécanique de la rupture
  • 1997: Ingénieur d'état en Construction mécanique


Domaines de compétences scientifiques :

  • biomatériaux
  • Biomatériaux et biocéramiques
  • caractérisation des matériaux
  • caractérisation des matériaux en particulier les céramiques
  • Caractérisation mécanique
  • Caractérisation mécanique (Traction)
  • Caractérisation Mécanique( Traction.compression)
  • DRX


Activités scientifiques :

Publications


- Short-term HDPE pipe degradation upon exposure to aggressiveenvironments, Matériaux & Techniques-2013

- Mechanical properties study in extruded HDPE-80 pipe wall used fornatural gas distribution, Matériaux & Techniques-2012

- Degradation of plastic pipe surfaces in contact with an aggressive acidic environment, Energy Procedia -2015

- Water quality of the plain of El-Hadjar wilaya of Annaba (Northeast Algeria), Energy Procedia -2015

- Reliability Index of HDPE Pipe Based on Fracture Toughness, MECHANIKA-2017

- Investigation of microstructure and mechanical properties of phosphocalcic bonesubstitute using the chemical wet method, American Institute of Physics-2018

- Study of reliability index for high-density polyethylene based on pipestandard dimension ratio and fracture toughness limits, The International Journal of Advanced Manufacturing Technology-2018

- A method for mechanical property assessment across butt fusion weldedpolyethylene pipes, The International Journal of Advanced Manufacturing Technology-2018

- Estimated life time in an HDPE pipe with a semi-elliptical defect under internal pressure, International Conference on Advances in Mechanical Engineering-2017

- Study of Optical and Morphological TiO2 Nano-Films Properties Deposited by MagnetronSputtering on Glass Substrate, American Institute of Physics-2019

- Experimental study of chemically aged HDPE pipe material in toluene-methanol mixture and distilled water, AIP Conference Proceedings-2019

- Study of The Reliability of A Composite Used In The Knee Prosthesis, Computational Intelligence & Wireless Sensor Networks-2019

Communications


- APPROCHE EXPERIMENTALE DE LA DISTRIBUTION DES PROPRIETES MECANIQUES A TRAVERS LA PAROI D’UN TUBE DE POLYETHYLENE HAUTE DENSITE, 3ème Conférence Internationale sur le Soudage, le CND et l’Industrie des Matériaux et Alliages (IC-WNDT-MI’12)-2012

- Surface degradation of HDPE-100 pipe: Effects of some aggressive environments (solvents), Séminaire de Mécanique, SNM’13-2013

- Mechanical Properties Study of HDPE Wall Pipes Exposed to Sulfuric Acid and Toluene-Methanol Mixture: Comparison Between Filament and Standard Specimens, 21ème Congrès Français de Mécanique CFM, Bordeaux, 26 au 30 août 2013-2013

- Synthèse par voie humide de l’hydroxyapatite : Influence du temps d’agitation, 2 èmes journées scientifiques de l'école ENSET,Skikda.-2014

- Mécanisme du frittage de l’hydroxyapatite (HA), 2 èmes journées scientifiques, Ecole ENSET, Skikda-2014

- USINAGE ET CARACTERISATION DES PROPRIETES MECANIQUES A TRAVERS LA PAROI D’UN TUBE EN POLYETHELENE, 2ème Conférence Internationale sur l’Energétique Appliquée et la Pollution (CIEAP’2014)-2014

- Synthèse et caractérisation de nano-hydroxyapatite, 2èmes Journées scientifiques Franco-Maghrébines : Caractérisation des Matériaux Complexes JSFM-CMC 2015 - Annaba (Algérie)-2015

- Effet des paramètres de synthèse sur les propriétés d’un biomatériau type phosphate de calcium : Hydroxyapatite, 2èmes Journées scientifiques Franco-Maghrébines : Caractérisation des matériaux complexes.-2015

- Frittage de l’Hydroxyapatite HA poreuses élaborées, Journées d'etudes sur la fonderie et l'environnement-2016

- Elaboration of Natural Hydroxyapatite Using Calcination at Various Temperatures, 3rd INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2016)-2016

- TiO2 films deposited by RF Magnetron Sputtering:Gas sensor application, 4th International Conference on Control Engineering & Information Technology (CEIT-2016)-2016

- EFFECTS OF TOLUENE-METHANOL MIXTURE ON MECHANICAL AND STRUCTURAL PROPERTIES OF HDPE PIPE, 7th International Conference on Industrial Engineering and Operations Management -2017

- Approche expérimentale pour la détermination de la distribution des contraintes résiduelles dans un pipe en polyéthylène., La 3 ème Conférence Internationale de Mécanique -2017

- Facile Manufacture and Characterization of Calcium Phosphate Powders for Biomedical Application, International Conference on Advanced Materials-2017

- Study of the Microstructural and Mechanical Properties of a Phosphocalcic Bone Substitute, TMREES Conference series; Technologies and Materials for Renewable Energy, Environment and Sustainability-2017

- Study of the reliability of a composite used in the knee prosthesis, International Conference on Applied Analysis and Mathematical Modeling (ICAAMM 2018), 20-24 June 2018, Istanbul, Turkey.-2018

- Study of Substrate Temperatures effects on Optical TiO2 Nano-films Properties deposited by RF Magnetron Sputtering for Gas Sensor application, International Conference on Applied Analysis and Mathematical Modeling-2018

- Analyse probabiliste d’une plaque composite sous sollicitations combinées, Fourth International Conference on Energy, Materials, Applied Energetics and Pollution. ICEMAEP2018, April29-30, 2018, Constantine,Algeria.-2018

- Estimated life time in an HDPE pipe with a semi-elliptical defect under internal pressure., International Conference on Advances in Mechanical Engineering-2017

- PREPARATION OF PMMA/GLASS FIBERS COMPOSITES LOADED WITH ORGANIC PARTICLES, 4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018 – ICAME2018-2018

- DEVELOPMENT AND CHARACTERIZATION OF HYDROXYAPATITE FOR BONE USE, 4th International Conference On Advances In Mecanical Engineering-2018

- AN EXPERIMENTAL STUDY ON MECHANICAL OF A COMPOSITE MATERIAL FOR ORTHOPEDIC USE, 4th International Conference On Advances In Mecanical Engineering-2018

- Restauration d’images radiographiques bruitées appliquées en Contrôle Non Destructif (CND), IC-WNDT-MI'14-2014

- Effect of Silicon Films Thickness on Aluminium Induced Crystallization of Hydrogene Amorphous Silicon (a-Si:H), 27th European Photovoltaic Solar Energy Conference and Exhibition (2012) Frankfurt.-2012

- Thermal analysis of aging of a matrix polymer material reinforced with a glass fiber., 6th International Conference on Computational and Experimental Science and Engineering-2019

- Thermal analysis of aging of a matrix polymer material reinforced with a glass fiber., 6th International Conference on Computational and Experimental Science and Engineering-2019

- Experimental study on a composite PMMA/glass fibers used in the manufacture of orthopedic prostheses., International Conference on Advanced Materials, Nanosciences and Applications (ICAMANA 2019) & Training school in Spectroscopies for Environment and Nanochemistry-2019

- Thermal analysis of aging of a matrix polymer material reinforced with a glass fiber., 5TH International Conference on Advances in Mechanical Engineering-2019

- Assessment of Effective Elastic Properties of Short-Fiber Reinforced Polymer by Micromechanical Probabilistic Model, FiBreMoD Conference-2019