Ministère de l'Enseignement Supérieur et de la Recherche Scientifique

Centre de Recherche
en Technologies Industrielles CRTI

crti

Curriculum vitae


BEDOUD_Khouloud

Mme. BEDOUD Khouloud
Équipe de recherche 33 : Commandes et Sûreté des Systèmes Electro-Energetiques « CSSE » (DMUE)
Grade : Maitre de Recherche Classe « A »
E-Mail : k.bedoud@crti.dz


Diplomes :

  • 2016: Doctorat en Electronique
  • 2010: Magistère en Electronique
  • 2005: Ingénieur d'état en Electronique


Domaines de compétences scientifiques :

  • Assembleur
  • Commande
  • Connaissance de maintenance sur les réseaux informatiques hard et soft
  • Création des pages publicitaires : (sur site web et blog)
  • Diagnostic industriel
  • Electronique
  • Java
  • Matlab


Activités scientifiques :

Publications


- Modeling and Control of the Wind Energy Conversion Systems Based on DFIG Under Sub- and Super-Synchronous Operation Modes, Proceedings of Engineering & Technology (PET)-2014

- Adaptive Fuzzy Gain Scheduling of PI Controller for control of theWind Energy Conversion Systems, Energy Procedia-2015

- Robust Control of Doubly Fed Induction Generator for WindTurbine Under Sub-Synchronous Operation Mode, Enegy Procedia-2015

- On-Line Monitoring and Classification of Stator windings Faults inInduction Machine Using Fuzzy Logic and ANFIS Approach, Proceedings of the International Conference on Recent Advances in Electrical Systems,-2016

- DIAGNOSIS OF ROTOR FAULT USING NEURO-FUZZY INFERENCE SYSTEM, Journal of Fundamental and Applied Sciences-2017

- Comparative Study of Wind Energy Conversion SystemDriven by Matrix Converter and AC/DC/AC Converter, Proceedings of the International Conference on Recent Advances in Electrical Systems-2016

- Assessment and analysis of wind energy generation and power control ofwind turbine system, Rev. Sci. Technol., Synthèse-2016

- Study of physico-chemical properties ofdiatomite Algeria: Application to thethermal insulation of liquid steel bath, 4ème Conférence Internationale des Energies Renouvelables (CIER-2016) Proceedings of Engineering and Technology – PET Vol.15, pp.65 - 69-2016

- Control of Matrix Converter Fed Induction Motor Drive, International Journal of ChemTech Research-2017

- Power Control of DFIG Driven by Matrix ConverterUnder Super and Sub Synchronous OperationModes, J. Automation & Systems Engineering-2017

- Study of physico-chemical properties of diatomiteAlgeria: Application to the thermal insulation ofliquid steel bath, Proceedings of Engineering and Technology – PET-2017

- A Fuzzy Logic Based Approach for the monitoringof Open Switch Fault in a SVM Voltage SourceInverter fed Induction Motor Drive, J. Automation & Systems Engineering -2018

- Application of Direct Power Control in Wind EnergyConversion System, Proceedings of Engineering and Technology – PET -2018

- Study of a double fed induction generator usingmatrix converter: Case of wind energy conversionsystem, i n t e rna t i onal journal o f hydrogen energy-2018

- Real-Time Switches Fault Diagnosis for Voltage Source Inverter Driven Induction Motor Drive, International Journal of Electrical and Electronic Engineering & Telecommunications-2019

- Propriétés Optique de TiO2 et Application de la Méthode de Swanepoel pour la Détermination de l’Épaisseur Optique et de l’Indice de Réfraction, International Journal of Scientific Research & Engineering Technology (IJSET)-2019

- Study of Optical and Morphological TiO2 Nano-Films Properties Deposited by MagnetronSputtering on Glass Substrate, American Institute of Physics-2019

- Experimental study of chemically aged HDPE pipe material in toluene-methanol mixture and distilled water, AIP Conference Proceedings-2019

Communications


- Détection et Isolation des Défauts à Base de Modèle, 3ème Conférence Internationale sur le Soudage, le CND et l’Industrie des Matériaux et Alliages (IC-WNDT-MI’12)-2012

- Modélisation d’une chaine de conversion d’énergie éolienne Basée sur une machine asynchrone à double alimentation., 21ème Congrès Français de Mécanique, 26 au 30 août 2013, Bordeaux, France(FR)-2013

- Elaboration of thin films : Gas Sensor Application, 3rd International Conference on Embedded Systems in Telecommunications and Instrumentation ICESTI’16 -2016

- Study of physico-chemical properties of diatomite Algeria Application to the thermal insulation of liquid steel bath, 4ème Conférence Internationale des Energies Renouvelables-2016

- TiO2 films deposited by RF Magnetron Sputtering:Gas sensor application, 4th International Conference on Control Engineering & Information Technology (CEIT-2016)-2016

- Study of physico-chemical properties of diatomite Algeria: Application to the thermal insulation of liquid steel bath, 4ème Conference Internationale des energies renouvenables CIER 2016-2016

- Monitoring of Mechanical Faults Using Wavelet Transform and Neuro-FuzzyInference System (ANFIS) in Induction Machine, la 3éme Conférence internationale de Mécanique -2017

- Monitoring of Mechanical Faults Using Wavelet Transform and Neuro-Fuzzy Inference System (ANFIS) in Induction Machine, la 3éme Conférence internationale de Mécanique -2017

- Modélisation Statistique pour l’Evaluation de l’Energie Eolienne, 3ème Conférence Internationale de Mécanique ICM'2017-2017

- Elaboration des Couches Minces du ZnO Déposé par la Méthode Spray Pyrolysis à partir de Trois Sources : Application Capteur de Température., The International congress for applied mechanics, VIIIèmes Journées d’Etudes Techniques – JET’2014-2014

- EFFECTS OF TOLUENE-METHANOL MIXTURE ON MECHANICAL AND STRUCTURAL PROPERTIES OF HDPE PIPE, 7th International Conference on Industrial Engineering and Operations Management -2017

- Eccentricity Fault Diagnosis based on Wavelet Transform and Neuro-Fuzzy Inference System in Doubly-fed Induction Generator, Congrès International sur les Energies Renouvelables et le Développement Durable-2017

- Direct Power Control of DFIG Used in Wind EnergyConversion System, Congres international sur les énergies renouvelables et le développement durable-2017

- CHARACTERIZATION OF NATURAL DIATOMITE BY THERMAL ANALYSIS, 6th TUNISIAN CRYSTALLOGRAPHIC MEETING-2017

- On line Monitoring of open switch Fault in the Association PWM Inverter-Induction Machine Using Fuzzy Logic Approach, International Conference on Recent Advances in Electrical Systems,-2017

- L’effet Thermique sur les Couches Minces du TiO2 Déposé par la Méthode de Pulvérisation Cathodique, 5ème Conférence Internationale des Energies Renouvelables (CIER-2017) -2017

- Real-time Switches Fault Diagnosis for Voltage Source Inverter Driven Induction Motor Drive, 2018 5th International Conference on Electrical and Electronics Engineering (ICEEE 2018)-2018

- Study of the reliability of a composite used in the knee prosthesis, International Conference on Applied Analysis and Mathematical Modeling (ICAAMM 2018), 20-24 June 2018, Istanbul, Turkey.-2018

- Study of Substrate Temperatures effects on Optical TiO2 Nano-films Properties deposited by RF Magnetron Sputtering for Gas Sensor application, International Conference on Applied Analysis and Mathematical Modeling-2018

- ANALYSE DU COMPORTEMENT MÉCANIQUE DES MATÉRIAUX COMPOSITES RENFORCÉS PAR DES FIBRES VÉGÉTALES, Fourth International Conference on Energy, Materials, Applied Energetics and Pollution-2018

- Proposition of a mechanical model to predict the behaviour of a laminate bio composite material, International Conference on Nanomaterials and Renewable Energies-2018

- Propriétés Optique de TiO2 et Application de la Méthode de Swanepoel pour la Détermination de l’Épaisseur Optique et de l’Indice de Réfraction, Couches minces, pulvérisation, semi-conducteur, TiO2, nano-films, UV-Vis, épaisseur, indice de réfraction, Swanepoel.-2018

- Monitoring of Short-Circuit Fault in PMW Voltage Source Inverter Based on Fuzzy Logic System, International Seminar in Industrial Engineering and Applied Mathematics -2018

- Dynamic mechanical analysis of hybrid composite laminate reinforced with glass/carbon fiber, 5th International Symposium on Aircraft Material ACMA-2014

- Buckling under imposed displacement of hybrid composite pipes, International Symposium on Aircraft Materials ACMA.Marrakech-Morocco.-2014

- Faults Detection and Isolation of DC-AC Static Converter Feeding Induction Machine, 6th International Conference on Automation, Control engineering & Computer Science ACECS’2019-2019

- Faults Detection and Isolation of DC-AC Static Converter Feeding Induction Machine, 7ème Conférence Internationale des Energies Renouvelables-2019